• FERROUS CASTING
  77.080.10 Irons
  UNI 7856:1978 Pig iron. Definition, classification and qualities.
  UNI 7857:1978 Spiegeleisen. Qualities, requirements and tests.
  UNI 8336:1981 Pig iron. Technical requirements of delivery.
  UNI 8337:1981 Pig iron. Sampling for chemical analysis.
  UNI EN 10001:1992 Definition and classification of pig- irons.
  UNI EN ISO 945:1995 Cast iron. Designation of microstructure of graphite.
  77.140.80 Iron & Steel Castings
  UNI 3157:1970 Steel sand casting. General technical requirements for delivery and inspection.
  UNI 3158:1977 Cast unalloyed quality steels for general engineering purposes. Qualities, requirements and tests.
  UNI 3158:1977 Unalloyed quality steels in castings for mechanical constructions for ordinary use. Quality, prescribed practice and testing.
  UNI 3159:1983 Stainless, heat resisting steel and alloy sand castings. Qualities, requirements and tests.
  UNI 3160:1983 Special, wear-resisting steel sand castings. Qualities, requirements and tests.
  UNI 5330:1969 Unalloyed grey iron for sand castings for use in the automobile industry. Qualities, requirements and tests.
  UNI 6325:1973 Unalloyed steel sand castings. Deviations in dimensions without tolerance indication and machining allowances.
  UNI 6325:1973 Unalloyed steel sand castings. Deviations for dimensions without indication of tolerance and machining allowances.
  UNI 6860:1971 Cast wheel centres of unalloyed or low alloyed steel for wheel sets of locomotives and railcars. Quality, requirements and tests.
  UNI 6860:1971 Unalloyed or lightly alloyed cast steel wheel centres for wheel sets of railway traction vehicles. Quality, requirements and tests.
  UNI 7068:1983 Unalloyed grey iron sand castings. Deviations in dimensions without tolerance indication and machining allowances.
  UNI 7451:1984 Malleable iron sand castings. Deviations for dimensions without tolerance indication and machining allowances.
  UNI 7464:1975 Cast special alloyed steel wheel centres for wheel sets of railway traction units. Quality, requirements and tests.
  UNI 7601:1984 Spheroidal graphite iron sand castings. Deviations in dimensions without tolerance indication and machining allowances.
  UNI 7737:1977 Austenitic cast iron for castings. Qualities, requirements and tests.
  UNI 8768:1985 Primary steel products (ingots and products obtained by continuous casting) intended for forging and drop forging. Quality requirements for delivery.
  UNI 8845:1986 Abrasion resistant white-cast-irons. Qualities, requirements and tests.
  UNI EN 10213-1:1998 Technical delivery conditions for steel castings for pressure purposes - General
  UNI EN 10213-2:1998 Technical delivery conditions for steel castings for pressure purposes - Steel grades for use at room temperature and elevated temperatures
  UNI EN 10283:2000 Corrosion resistant steel castings
  UNI EN 12454:2000 Founding - Visual examination of surface discontinuities - Steel sand castings
  UNI EN 1369:1998 Founding - Magnetic particle inspection.
  UNI EN 1371-1:2001 Founding - Liquid penetrant inspection - Sand, gravity die and low pressure die castings
  UNI EN 1371-2:2001 Founding - Liquid penetrant inspection - Investment castings
  UNI EN 1559-3:1999 Founding - Technical conditions of delivery - Additional requirements for iron castings
  UNI EN 1560:1998 Founding - Designation system for cast iron - Material symbols and material numbers
  UNI EN 1561:1998 Founding - Grey cast irons
  UNI EN 1562:1999 Founding - Malleable cast irons.
  UNI EN 1563:1998 Founding - Spheroidal graphite cast irons
  UNI EN 1564:1999 Founding - Austempered ductile cast irons
  UNI ISO 4993:1989 Steel castings. Radiographic inspection.
  77.120.20 Stainless Steel
  UNI EN 10283:2000 Corrosion resistant steel castings
  77.14.30 Steels for Pressure Purposes
  UNI EN 10213-1:1998 Technical delivery conditions for steel castings for pressure purposes - General
  UNI EN 10213-2:1998 Technical delivery conditions for steel castings for pressure purposes - Steel grades for use at room temperature and elevated temperatures
  UNI EN 10213-3:1998 Technical delivery conditions for steel castings for pressure purposes - Steel grades for use at low temperatures
  UNI EN 10213-4:1998 Technical delivery conditions for steel castings for pressure purposes - Austenitic and austenitic-ferritic steel grades
  77.100 Ferroalloys
  UNI ISO 5445:1984 Ferrosilicon. Specification and conditions of delivery.
  UNI ISO 5446:1984 Ferromanganese. Specification and conditions of delivery.
  UNI ISO 5447:1984 Ferrosilicomanganese. Specification and conditions of delivery.
  UNI ISO 5448:1984 Ferrochromium. Specification and conditions of delivery.
  UNI ISO 5449:1984 Ferrosilicochromium. Specification and conditions of delivery.
  UNI ISO 5450:1984 Ferrotungsten. Specification and conditions of delivery.
  UNI ISO 5451:1984 Ferrovanadium. Specification and conditions of delivery.
  UNI ISO 5452:1984 Ferromolybdenum. Specification and conditions of delivery.
  UNI ISO 5453:1984 Ferroniobium. Specification and conditions of delivery.
  UNI ISO 5454:1984 Ferrotitanium. Specification and conditions of delivery.
  UNI EN 26501:1993 Ferronickel. Specification and delivery requirements.
  UNI 3102:1985 Ferro-phosphorus, silicon, silicon- calcium, silicon-manganese-aluminium. Requirements and delivery conditions
   

• NONFERROUS CASTING
  77.120.10 Aluminum and Aluminum Alloys
  UNI 10903:2001 Aluminium and aluminium alloys - Aluminium alloy castings for components requiring leak tightness
  UNI 7964:1979 Casting aluminium alloys for use in automotive industry.
  77.120.20 Magnesium and Magnesium Alloys
  UNI 6168:1968 Casting primary magnesium alloys. General notions.
  UNI 6169:1987 Casting primary magnesium-aluminium- zinc-manganese alloy (Al 8,5%, Zn 0,6%, Mn 0,2%).
  UNI 8705:1987 Pressure die casting primary magnesium- allumunium-manganese alloy (Al 6% - Mn 0,2%).
  UNI 8706:1986 Casting magnesium alloys for use in automotive industry.
  77.120.30 Copper and Copper Alloys
  UNI 10799:1999 Copper and copper alloys - Ingots and castings - Zinc-bronze (CuSn6Zn6)
  UNI 10800:1999 Copper and copper alloys - Ingots and castings - Special aluminium bronze (CuAl9Fe3Zn3Ni2) for remelting of mechanical articles with tight tolerances
  UNI EN 1982:2000 Copper and copper alloys - Ingots and castings
  77.120.60 Lead, Zinc, Tin and their Alloys
  UNI EN 12844:2000 Zinc and zinc alloys - Castings - Specifications
  77.150.01 Products of Nonferrous Metals in General
  UNI 4398-4:1981 Nonferrous metals. Terminology. Unwrought products and castings.
  UNI 7450-1:1975 Pressure die castings. Machining stock allowances.
  UNI 7450-2:1975 Pressure die castings. Ejector pin marks.
  UNI 7450-3:1975 Pressure die castings. Draft requirements in cored holes.
  UNI 8628:1984 Defects in castings of metallic materials. Terms and definitions.
  77.150.10 Aluminium Products
  UNI 10297-5:1994 Aluminium scraps. Types, characteristics and chemical composition. Aluminium alloys castings.
  UNI 10429:1996 Aluminium alloys. Pressure die casting. General requirements for delivery.
  UNI 10569:1996 Pressure die castings of aluminium alloy. General tolerances.
  UNI 9348:1989 Aluminium and aluminium alloys castings. Technical general conditions of delivery.
  UNI EN 1559-4:2001 Founding - Technical conditions of delivery - Additional requirements for aluminium alloy castings
  UNI EN 1706:1999 Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties
  UNI EN 1780-1:1998 Aluminium and aluminium alloys - Designation of unalloyed and alloyed aluminium ingots for remelting, master alloys and castings - Numerical designation system.
  UNI EN 1780-2:1998 Aluminium and aluminium alloys - Designation of unalloyed and alloyed aluminium ingots for remelting, master alloys and castings - Chemical symbol based designation system.
  UNI EN 1780-3:1998 Aluminium and aluminium alloys - Designation of unalloyed and alloyed aluminium ingots for remelting, master alloys and castings - Writing rules for chemical composition.
  UNI EN 601:1995 Aluminium and aluminiuml alloys. Castings. Chemical composition of casting for use in contact with food.
  77.150.30 Copper Products
  UNI 6346:1968 Bronze and brass castings. Deviations in dimensions without tolerance indication.
  UNI EN 1982:2000 Copper and copper alloys - Ingots and castings
  77.150.60 Lead, Zinc and Tin Products
  UNI 10431-5:1995 Zinc scraps. Types, characteristics and chemical composition. Mixed zinc alloys from crushed casting.
  UNI 3718:1956 Zinc alloy castings. Qualities, requirements, tests.
  UNI EN 12844:2000 Zinc and zinc alloys - Castings - Specifications
  UNI EN 1559-6:2001 Founding - Technical conditions of delivery - Additional requirements for zinc alloy castings
   
• 77.180.Equipments for the Metallurgy Industry
  UNI 4628:1976 Foundry sand. Sampling and test methods.
  UNI 473:1982 Foundry patterns and auxiliary equipment.
  UNI 6716:1970 Foundry bentonites. Requirements and tests.
  UNI 6764:1970 Foundry tools. Dimensional proportionment, models and designation of molding flasks.
  UNI 6765:1970 Foundry tools. Molding flasks with longitudinal references.
  UNI 6766:1970 Foundry tools. Molding flasks with triangle references.
  UNI 6767:1970 Foundry tools. Reference bushes for molding flasks.
  UNI 6768:1970 Foundry tools. Wedges and clamps of closing for molding flasks.
  UNI 6769:1970 Foundry tools. Pins for molding flasks.
  UNI 6770:1970 Foundry tools. Metallic matchplates with longitudinal references.
  UNI 6771:1970 Foundry tools. Metallic matchplates with triangle references.
  UNI 6772:1970 Foundry tools. References pins for metallic matchplates.
  UNI 7309:1984 Auxiliary foundry materials. Classification, terms and definitions.
   

• 77.040.20.40 Mechanical Testing in General
  UNI 7062:1972 Non-distructive tests of metallic materials. Dry magnetic particle flow detection for steel castings.
  UNI EN 1371-1:2001 Founding - Liquid penetrant inspection - Sand, gravity die and low pressure die castings
  UNI EN 1371-2:2001 Founding - Liquid penetrant inspection - Investment castings
  UNI ISO 4993:1989 Steel castings. Radiographic inspection.